
液化石油气/ CNG Gas Cylinder Shot Blasting Machineis simple to operate with minimum maintenance and the operator has to load and unload the cylinders on rotating diabolic rollers. The outer surface of the metallic LPG / CNG Cylinder Shot Blasting Machine demands to be blast cleaned to remove rust, corrosion and prepare the LPG & CNG cylinder’s surface for thermal coating and painting.
液化石油气& CNG Cylinder Shot Blasting Machine is utilized to automatically clean or etch the surface of the steel cylinders by blastingabrasive mediaarising from blasting wheels. The steel LPG & CNG cylinders get shot blasted as they pass through theblast room(booth/ chamber). The cylinders also get rotated on the rollers as they pass through to the blasting chamber to get the cleaning of the complete surface.
Contents
Specification :
Technical Specification | Model S-800DB | Model S-400DB |
Size of Blast Wheel | 191/2” x 21/2 | 191/2” x 21/2” |
No. of Blast Wheel | 2 Nos. | 1 No. |
Power of Blast Wheel | 15 HP X 2 Nos. | 15 HP X 1 No |
Shot Flow Rate/Minute/wheel | 150 kg. | 150 Kg |
Shot Velocity (Mtr./Second | 65-75 | 65-75 |
Shots Consumption Rate | Approx. 0.13 Kg/hp/hr | Approx. 0.13 Kg/hp/hr |
Dimension details of Machine
a)Cabinet
(i)Length: | 2500mm | 2000 mm |
(ii) Width | 1200 mm | 1200 mm |
(3)高度 | 1600 mm | 1600 mm |
b) Overall Dimension of Machine with Dust Collector
(i)Length: | 9000 mm | 8000 mm |
(ii) Width | 4500 mm | 4000 mm |
(3)高度 | 5000 mm | 5000 mm |
c) Dimension of Dust Collector
(i)Length: | 1850 mm | 1350 mm |
(ii) Width | 1350 mm | 1350 mm |
(3)高度 | 3600 mm | 3600 mm |
d) Ground space required for machine
(i) Length | 9000 mm | 8000 mm |
(ii) Width | 4500 mm | 4500 mm |
Dust Collector Capacity | 3000 cfm | 2000 cfm |
Motor HP for Dust Collector lower | 7.5 H.P. | 5 H.P. |
Filter cloth area of Dust Collector | 48 Sq. Mtr. | 36 Sq. Mtr. |
Conveyor System | Dia bola type | Dia bola type |
Job Movement | Cylinders while moving forward also rotates. | Cylinders while moving forward also rotates. |
Bucket Elevator (Size) | 600mm x200mm | 600mm x200mm |
Bucket size : (i) Length : | 125 mm | 100 mm |
(ii) Width : | 125 mm | 75 mm |
(iii)Height : | 90 mm | 83 mm |
Total power requirement | 44.0 H.P | 25.0 H.P |
控制面板 | Centralized Desk type Panel | Centralized Desk type Panel |
Noise Level | 80-85 dB (A) at 3 Mtr. From machine | 80-85 dB (A) at 3 Mtr. From machine |
Cleaning Standard | SA 2.0 to SA 2.5 | SA 2.0 to SA 2.5 |
Environmental Effect | Green Machine | Green Machine |
Foundation | Pitless | Pitless |
液化石油气& CNG Gas Cylinder Shot Blasting Machine contains :
- Shot Blasting Chamber
- Shots Recycle System including screw conveyor, bucket elevator, and air wash separator
- Blasting Wheels
- Steel Cylinder Moving and Rotating System
- Dust Removing System including pulse jet dust collector and centrifugal air fan
- Electrical Control System
液化石油气/ CNG Gas Cylinder Shot Blasting Machine Manufacturers in India
We are one of the best LPG / CNG Gas Cylinder Shot Blasting manufacturers in India and we also provideSand Blasting Machine, Portable Shot Blasting Machine,Grit blasting machine, thermal spray gun, metalizing gun,Shot Blasting Machinein India at a low price for sale. we are the best portfolio of thermal spray guns with the best price.
What types of blasting machines are you offering?
- Paver block shot blasting machine
- Spinner hanger shot blasting machine
- Spinner Hanger double door type of Shot Blasting Machine
- Stone shot blasting machine
- Coil shot blasting Machine
What is difference between shot blasting and sandblasting machine?
Sandblastingandshot blasting machine都是被利用的过程chanical surface cleaning. Many industries that use metal apply these methods in daily practices for removing corrosion, paint and other films and preparing the surface forcoating. In both methods, cast ironwork is also blasted to remove old paint layers. But the difference between bothblastingprocesses is only for principle and application types.
What difference b/w Wheel blasting and Air blasting Explain it
wheel blasting
Wheel blastingis the airless blast action that uses a wheel with centrifugal force to propel theabrasiveagainst the parts. It is a high-velocity, high-efficiency blasting operation with typically faster time cycles for the operation.
Air Blasting
Air blastingis also called air cannon, used to clean, peen or polish metal. It is a de-clogging device composed of two main elements:
- Pressure container
- Triggering mechanism
What is a shot blasting machine?
Theshot blasting machineis a mechanical method of propelling abrasive using a centrifugal force using a wheel to remove surface and other impurities from the surface of steel applications. Generally,blastingprior to finishing serves three primary purposes:-
- It cleans and descales surfaces.
- Adds texture to enhance paint adhesion.
- Properly reduces maintenance costs by increasing thecoatinglife of a surface.
Inquiry Now